Engines

Loc.
Make
Model
Serial#
SMOH


C
Lycoming
O-360-A1F6D
L-17528-36A
469


(2000 TBO) 180HP, Overhauled 4/2014 by Zephyr Aircraft EnginesProps

Loc.
Make
Model
SPOH


C
McCauley
B2D34C208
34


HUB SN: 774933 (2000 TBO), Overhauled 5/1/24 by Aircraft Propeller Works, Inc.

Complete New Panel Overlay installed in 1/2017 all new Wires, Buss Bar, Circuit Breakers, Pitot Static Tubes, Antennas, Coax, Switches, etc. (See Log Entry for Full Details)Garmin GTN 750 NAV/COMM/GPSGarmin GMA350 Audio PanelGarmin GNC255A NAV/COMMGarmin GTX327 Transponder with GDL-88 ADS-BAspen EFD1000 Pro Max PFD, Synthetic Vision, AOA, 55X A/P Control, AOA, Traffic, Weather on DisplayAspen EFD1000 MAX EFD Pro MaxAspen Emergency Back-up Battery Upgrade KitSTEC 55X Auto Pilot with Altitude Hold and Auto TrimAvion Research Yokes with PTT, PTC, A/P Disconnect, Trim Switch Flightstream 510 Card with Voice CommandMid Continent MD-93 Clock with USB ChargerSIRS CompassArtex 1000 ELT 406 Mhz with Remote Activation SwitchJPI 930 EDM Primary Engine Instrument including CIES Electronic Fuel Senders

Recover 1/2017 by Duncan Interiors, Replaced all Plastic with new from Vantage Plane Plastics and cover in Tapis Milkweed Ultra Leather. Seats and Side Panels covered in Moore & Giles Bitter Sweet and coffee leather, Doe Sheepskin on Pilot Co Pilots Seats. Nob Hill Ash Carpet, seat belts re-webbed. All materials with Burn Certificates, All New Glass, New Seat Tracks, New Heating and Hire Hose replaces with SCAT Hose, Acid Etch, Alodien and Zinc Chromate Cabin Area, Hangared since Recover.

Repaint 1/2017 Overall White with Black and Gold Stripping, Registration Black with Gold Shadowing, Hangar Kept since Painting.Disassemble Aircraft for Stripping and Paint. Remove All control Service, Inspection Panels, antennas, Cowl Fasteners, Locks, Handles, etc. Aircraft stripped by Fosters Aircraft Finishing with Sea and Sky 909 Stripper, Acid Etch, Alodine all Aluminum Parts, Prime all parts with Epoxy Primer, Base coat painted with Jet Glo 570-535 Matterhorn White, Stripes painted with Imron 882348 Las Vegas Gold and Imron N0327 Sable Black. Balance all Control Surfaces per Cessna Service Manual, install on aircraft with all new Hardware, Bushings, Bolts, Rod Ends, Flap Rollers, etc. (See Log Entry for Full Details).

Damage History: NoAnnual Inspection: 5/1/2024IFR Certification Accomplished 4/22/24GTN 750 Software Updated, EFD1000 Updated 8/19/24